Paintless Dent Repair Works!

Dents happen. It’s a fact of life. It is actually amazing our cars don’t collect more dents and dings than they do. What with hail storms, runaway shopping carts, kids toys and all the other wonderful obstacles out there you would think our cars would look be dented all the time. With the recent hailstorms that have plagued the area, you may wake up one morning to find your car looks like a golf ball. These tiny dents pepper your hood, trunk and roof and can just take the wind out of your sails when you see them.

When and if your vehicle does take a dent, you should consider paintless dent repair as an option. It will almost certainly save you both time and money over traditional dent repair. Most repairs can be done in a single day and the cost is a fraction of what you would pay if you decided to take the car to a body shop.

If you are not familiar with PDR, it is basically a simple way to repair minor dings and dents in your vehicle without having to repaint. It takes a skilled hand and the right equipment, but when done properly it is impossible to see the damage once completed.

The trained technician will need to be able to gain access to the dent from behind, so certain areas of your car will not be available for the procedure. Also, if the paint is broken from the dent, needless to say, paintless repair will not be an option.

The technician uses a variety of specialized tools to reshape, prod and press the metal back into shape, thus removing the damage. You will be amazed at the damage that can be removed from the process. Larger dents take time, but as long as the paint is intact, paintless dent repair is an option. It takes patience and a steady hand, but it can be done.

PDR is a real advancement in the science of auto body and collision repair. It is a time saver and a money saver and should definitely be explored as a serious option if you have dents.

You should consider PDR if…

• The dent is in an accessible area for the technician to work

• There is no paint damage created from the dent

• There is no crease in the dent

• You want to save a lot of money over traditional body work

Boat Detailing Tips and Procedures

Auto detailers are often asked to clean boats and detail boat trailers. There is an easy and efficient way to do this with little effort. Washing and waxing boat trailers is an easy sale. Be sure to offer the boat owner a trailer wax. Let the owner know that a heavily waxed trailer is more rust resistant even when used in salt water. They can wax now or repaint later. To remove rust, brush on two coats of Ospho Acid, available in paint stores and marine supply shops. It will change the chemistry of rusting steel from an active to a passive state and stop rust cold.

Washing Fenders, Lines and Shore Power Cords

When washing lines most manufacturers recommend putting them in a net bag and throwing them in a washing machine. Although you cannot do this we recommend Gemtek Cleaner/Degreaser, which will not remove the finish on the lines. Washing fenders, same thing and afterwards wipe with a protective spray such as CRS or WD-40. Cleaning shore power cables is something not everyone does. It can leave a boat looking extra clean (the way a pair of clean and dressed wheels lights up a car) and really goes above and beyond the call of duty. You can charge $1.00 – $2.50 a foot for cleaning them. Most of the time they are greasy and grimy from docks and creosote tar. Make sure power is off and they are unplugged before attempting to clean. You don’t want shocking while you shine. Keep cords out of the water as much as possible. The way to really clean them fast is with acetone. Work one section at a time and slowly.

The acetone slightly melts and softens the cords outer shell so be careful not to over saturate the cord and towel. Change towels exposing a clean surface. This will make your work faster. Then dress them with a little 303 protectant or Armor-All. You can also use Starbrite’s Power Cord Cleaner as well as a protectant and acetone neutralizer. Stowed hoses can attract mold, mildew and grease from lack of use or due to climate and other conditions. Follow the same cleaning procedures for the shore power cables.

What Is Car Body Glass Coating?

Glass coating is an inorganic material made of a Silica or a Quartz-Silane-based compound. It is used to protect the painted surfaces of car bodies. It is less likely to stain. Unlike traditional wax, its luster and protection can be long-lasting once it is applied. This is because they do not contain materials that oxidize (bind with oxygen). Oxidation weakens the original protection and shine of many car products, thus rendering the car surface prone to damage. It is easy to maintain, provides clean, shiny surfaces and long-lasting protection.

What is the difference between coating and wax?

The main component of wax is carnauba wax oil, which is extracted from palm trees. In recent years, some waxes have added petroleum. Higher quality waxes contain more carnauba oil. Carnauba wax is oil based, so it has water-repellent characteristics and can obscure scratches. However, there are also disadvantages. Waxes can easily become dirty because oil has a high viscosity (thick and sticky). This means dirt can stick to it. Also, wax can easily melt and deteriorate because it is sensitive to heat. Sunshine or engine heat can promote deterioration and cause wax to melt off the car’s surface. Wax can also break down in the rain or when the car is washed.

On the other hand, coating has a chemical composition of silicon, silica, fluorine and titanium. These molecules form a film coating that penetrates between the molecules of the car’s painted surface, creating a very powerful protective layer. Resistant to dirt, heat and rain, coating’s protection and shine will last over a longer period than wax.

There are various kinds of coatings that range in application complexity from simple, which any consumer can apply, to products for professional use only.

During its application, if the car’s surface is dirty and rough, materials will not adhere to car body paint, so surface preparation before application is important.

Types of Glass Coatings

Glass-based coatings can be broadly divided into two categories: quartz-silane based coatings and silica-based coatings.

The quartz-silane-based glass coating, also known as “completely cured glass film type” achieves very high gloss and strong durability. It protects the car body by creating a cured coating of silica on the car’s surface. However, it takes about three weeks for the coating to be fully cured, which is a drawback. It is also expensive because it takes a long time for the product to be formulated.

The silica-based glass coating, also known as “glass fiber type “, also makes a film, coating the surface of the car body. It is fixed to a silicon polymer molecule. It is an easy formulation and, therefore, is costs less to produce. However, its durability and water repellency is inferior compared to the quartz-silane-based.

In addition, some of the fluorine-based coatings, such as Teflon, are used to coat car bodies. They are excellent in durability. However, they are inferior compared to glass coatings and more expensive to formulate. As a result, glass coatings are on the cutting edge of technology’s focus of exploration.

A Glass Coating Hybrid

Currently, there is debate about whether hydrophilic (attracts water) products are more effective than hydrophobic (repels water) products for car care. Glass is hydrophilic. The new types of glass coatings are hybrids, adding a silicone resin layer to the existing glass layer to change the hydrophilic trait of glass to hydrophobic, thus creating a strong water repellant product.

Why Are Car Detailing Services Important?

When you are purchasing the car, you want to maintain it in top condition, as far, as possible. Unfortunately, it is time out on the road, the weather conditions and regular wear-tear takes its toll. Over time, the shiny coat starts appearing dull with rusted portions and peeled paints. Car detailing services can restore the appearance. When done well, it will work like magic on your overused vehicle surfaces.

The shiny look will beckon you as it did many years before in the showroom. Those looking to save money on repaint work should consider application of sealant or wax on the surface. Thus, with detailing you can save loads of money. The paint aftermarket job is not as high quality as the factory paint. You would want to maintain it as long as possible.

The major benefits of car detailing are as follows.

Proper protection

This of course is the major advantage of procedures like Opti coating, a part of detailing procedure. One can preserve both the resale value and the paint of the car with regular waxing. The shiny top coat and the new like looks will give the prospective buyers the confidence they need. This way they will go on ahead with the transaction.

The detailing procedure will maintain top conditions both outside and inside the vehicle for the complete looks. Mechanical soundness of course is the most important part. However, if you cannot top this up with a stellar appearance, the buyers may feel cheated.

Make the best first impressions

What you want to do with a fantastic car? Make great impressions of course. Now, a dull appearance is going to put off the people. Even the best brands and models do not look good when neglected by their owners. You want to do justice to your investment by maintaining it in top shape as long as possible. Car detailing services can help you in this endeavor. They have the means and the expertise to fulfill your desires. Now, as you drive down the street in your shiny car, everyone is going to give you the looks. The reason for other’s envy becomes a matter of pride for you.

Nowadays, more and more people are keeping their cars longer than before. The reason behind this is simple. Nowadays, the quality of these products has increased. Better build make them work smoothly for long periods. Why would you want to replace a perfectly good car? You do not have too especially when you love to maintain it in top conditions as well. When it runs longer, problems will start appearing. After all, it has to withstand door dings at parking lots, scratches, harsh UV rays, rusting, and chemical exposure. Detailing can make much of these problems disappear. High-quality Opti coat increases the resistance of the exterior surfaces.

They contain ultraviolet inhibitors for effective paint protection.