What Is Car Body Glass Coating?

Glass coating is an inorganic material made of a Silica or a Quartz-Silane-based compound. It is used to protect the painted surfaces of car bodies. It is less likely to stain. Unlike traditional wax, its luster and protection can be long-lasting once it is applied. This is because they do not contain materials that oxidize (bind with oxygen). Oxidation weakens the original protection and shine of many car products, thus rendering the car surface prone to damage. It is easy to maintain, provides clean, shiny surfaces and long-lasting protection.

What is the difference between coating and wax?

The main component of wax is carnauba wax oil, which is extracted from palm trees. In recent years, some waxes have added petroleum. Higher quality waxes contain more carnauba oil. Carnauba wax is oil based, so it has water-repellent characteristics and can obscure scratches. However, there are also disadvantages. Waxes can easily become dirty because oil has a high viscosity (thick and sticky). This means dirt can stick to it. Also, wax can easily melt and deteriorate because it is sensitive to heat. Sunshine or engine heat can promote deterioration and cause wax to melt off the car’s surface. Wax can also break down in the rain or when the car is washed.

On the other hand, coating has a chemical composition of silicon, silica, fluorine and titanium. These molecules form a film coating that penetrates between the molecules of the car’s painted surface, creating a very powerful protective layer. Resistant to dirt, heat and rain, coating’s protection and shine will last over a longer period than wax.

There are various kinds of coatings that range in application complexity from simple, which any consumer can apply, to products for professional use only.

During its application, if the car’s surface is dirty and rough, materials will not adhere to car body paint, so surface preparation before application is important.

Types of Glass Coatings

Glass-based coatings can be broadly divided into two categories: quartz-silane based coatings and silica-based coatings.

The quartz-silane-based glass coating, also known as “completely cured glass film type” achieves very high gloss and strong durability. It protects the car body by creating a cured coating of silica on the car’s surface. However, it takes about three weeks for the coating to be fully cured, which is a drawback. It is also expensive because it takes a long time for the product to be formulated.

The silica-based glass coating, also known as “glass fiber type “, also makes a film, coating the surface of the car body. It is fixed to a silicon polymer molecule. It is an easy formulation and, therefore, is costs less to produce. However, its durability and water repellency is inferior compared to the quartz-silane-based.

In addition, some of the fluorine-based coatings, such as Teflon, are used to coat car bodies. They are excellent in durability. However, they are inferior compared to glass coatings and more expensive to formulate. As a result, glass coatings are on the cutting edge of technology’s focus of exploration.

A Glass Coating Hybrid

Currently, there is debate about whether hydrophilic (attracts water) products are more effective than hydrophobic (repels water) products for car care. Glass is hydrophilic. The new types of glass coatings are hybrids, adding a silicone resin layer to the existing glass layer to change the hydrophilic trait of glass to hydrophobic, thus creating a strong water repellant product.

Why Are Car Detailing Services Important?

When you are purchasing the car, you want to maintain it in top condition, as far, as possible. Unfortunately, it is time out on the road, the weather conditions and regular wear-tear takes its toll. Over time, the shiny coat starts appearing dull with rusted portions and peeled paints. Car detailing services can restore the appearance. When done well, it will work like magic on your overused vehicle surfaces.

The shiny look will beckon you as it did many years before in the showroom. Those looking to save money on repaint work should consider application of sealant or wax on the surface. Thus, with detailing you can save loads of money. The paint aftermarket job is not as high quality as the factory paint. You would want to maintain it as long as possible.

The major benefits of car detailing are as follows.

Proper protection

This of course is the major advantage of procedures like Opti coating, a part of detailing procedure. One can preserve both the resale value and the paint of the car with regular waxing. The shiny top coat and the new like looks will give the prospective buyers the confidence they need. This way they will go on ahead with the transaction.

The detailing procedure will maintain top conditions both outside and inside the vehicle for the complete looks. Mechanical soundness of course is the most important part. However, if you cannot top this up with a stellar appearance, the buyers may feel cheated.

Make the best first impressions

What you want to do with a fantastic car? Make great impressions of course. Now, a dull appearance is going to put off the people. Even the best brands and models do not look good when neglected by their owners. You want to do justice to your investment by maintaining it in top shape as long as possible. Car detailing services can help you in this endeavor. They have the means and the expertise to fulfill your desires. Now, as you drive down the street in your shiny car, everyone is going to give you the looks. The reason for other’s envy becomes a matter of pride for you.

Nowadays, more and more people are keeping their cars longer than before. The reason behind this is simple. Nowadays, the quality of these products has increased. Better build make them work smoothly for long periods. Why would you want to replace a perfectly good car? You do not have too especially when you love to maintain it in top conditions as well. When it runs longer, problems will start appearing. After all, it has to withstand door dings at parking lots, scratches, harsh UV rays, rusting, and chemical exposure. Detailing can make much of these problems disappear. High-quality Opti coat increases the resistance of the exterior surfaces.

They contain ultraviolet inhibitors for effective paint protection.

Texas Artists and Art Movements

Edgar Byran Davis – Philantropist

From “Texans Always Move Them: A True History of Texas”

When Texas wildcatter, Edgar Byram Davis struck oil near Luling, Texas, everyone benefited. After making profits on his discovery, he used his funds to improve Texas. Davis celebrated by hosting a huge free barbecue. He invited friends, employees and associates in Luling, Texas. He shared his profits by contributing to charitable organizations, purchased golf courses for Luling, improved hospitals and supported the arts. Among his patronage was supporting the Broadway play, “The Ladder” for two years and the controversial figure Edgar Cayce. Davis personally paid for tickets to the play due to his belief in reincarnation which the play emphasized and that it was written by a friend of his.

Texas Impressionism

Edgar B. Davis also underwrote the Texas Wildflower Competitive Exhibitions of art. The $5,000 prize money awarded in the competition was the richest art award offered in the United States. Prizes were given for national and state-wide competition. Davis liked the Texas wildflowers, and had possibly been inspired by Texas artist Julian Onderdonk (1882-1922), who was known as the “Bluebonnet Painter” and “Father of Texas Painting”. His paintings of the Texas landscapes often portrayals of areas near his home in San Antonio gained him a national reputation. His father, Robert Jenkins Onderdonk (1852-1917) was also an established artist.

These art competitions brought painters to Texas along with encouraging native born artist to pursue painting. These competitions almost single handedly brought about a painting style known as “Texas Impressionism”. Texas Impressionism sought to portray the effects of sun and light on outdoor subjects. The Impressionist movement, which began in France, was brought to Texas through this movement. Texas born artists Jose Arpa (1858-1952), Robert Wood (1889-1979), Rolla Taylor (1871-1970), and Porifirio Salinas (1919-1973). and Dawson-Dawson Watson (1864-1939) was born in England, yet his close association and similar style with the Texas painters lumps him in with the Texas impressionists.combined the popular painting style of impressionism with Texas landscapes. The artist Porifirio Salinas met fellow artists Robert Woos and Jose Arpa by selling them art supplies. From them he learned their unique style, even cooperating with them on some paintings. From those lessons, he mastered his own style. One of his later students, Palmer Chrisman (1913-1984), became an acclaimed artist.Chrisman provided medical services in trade for art lessons. Chrisman’s paintings were given out as gifts by President Lyndon Johnson during his presidency. This new style encouraged painters to come to Texas, with the Dallas area becoming a center of the new Texas school of artistic painting.

Modern Texas artists whose paintings reflect this style are Dalhart Windberg and Larry Dyke.Dyke’s work has hung in the White House and other prominent locations. Larry Dyke’s paintings have his signature Bible passage reference on each work, which is one of his unique markers.

Lone Star Regionalism

Davis’ financial patronage was one of the bright spots during the economic hardships of the depression in Texas of the 1930’s. Between his patronage and WPA projects encouraging the development of artists and writers, a new style developed known as “Lone Star Regionalism”. This new style gradually gained dominance over the previous movement of Texas Impressionism. The new style used darker colors to portray subjects unique to Texas. Some critics may claim that the dark colors reflected the dark mood of the times. The artists attempted making their subjects easy for the common man to understand. The ‘regionalists’ chose everyday life as subjects for their art and writing. This increased emphasis on regionalism occurred in art and literature. Writers like J. Frank Dobie were part of this regionalism movement. J. Frank Dobie and Texas native, Tom Lea pooled their talents in joint ventures during this time. Artists in the movement included Clinton King (1901-1979),Thomas Hart Benson, Jerry Bywaters (1906-1989), Alexandre Hogue, Henry Nash Smith and David R. Williams. These artists were inspired by writers such as John Dewey, George Santayana and Constance Rourke. A group of the more prominent artists living in Dallas became known as the “Dallas Nine”. The regionalist artists were influential on art throughout the United States. At the 1939 World’s Fair held in New York City, after seeing the work of the Texas artists, the President of the exhibition commented, “The exhibition indicates that New York is still the art center of the nation, but it shows clearly that during the recent years there has been a marked decentralization, and that a number of cities and towns throughout the country have risen to challenge the leadership of the eastern metropolis.”

Artists during these harsh times resorted to many creative techniques and mediums. They painted on railroad cars, burlap, and almost any surface that paint would adhere to. In their resourcefulness, they made their own frames and canvas stretchers. The government program of WPA employed artists to paint murals for public buildings such as post offices. The post office and court house works often used murals to convey Texas and historic themes. Among the leading mural painters were Texas born artists Tom Lea (1907-2001) and Ruth Monro Augur.

Tom Lea’s work was featured on federal buildings and post offices throughout the nation. He also served as a military artist during World War II. At the 100th anniversary of his birth, President George W. Bush requested the Tom Lea painting of Rio Grande from the EL Paso Museum of Art would hang in the oval office. The work was eventually purchased and is currently on display in the oval office of the White House.

Texas Still Lifes

There were some Texas regionalism artists who were grouped into a subgroup of Texas Still Lifes. These are still a part of Texas regionalism, yet with works focused on still life subjects. Among this group were Lloyd L. Sergeant (1881-1934),Robert J. Onderdonk, Alexandre Hogue, Florence McClung, H. D. Bugbee, Olive Vandruff, Emilio Caballero and Isabel Robinson. Many of these artists were located in North Texas or the Panhandle sections of the state. They shared a common theme of still life painting within the Texas Regionalist style and painted their works in the 1920’s and 1930’s.

Modern Artists of Note

Another modern Texas artist of note is Bruce Marshall. Marshall is known for his portrayal of Texas historic events and persons. His depictions of military uniforms and the accuracy of his detailing has earned high praises. He has written and published books on early Texas history and uniforms. His art was renowned enough to be knighted for his accomplishments, so that he is now known as “Sir Bruce Marshall”. He and his wife reside in the Austin, Texas area on land that has been in his family since colonial Texas.

JOHNNIE LILIEDAHL is another Texas artist with an international reputation. Her instruction and art are in demand around the world. People from Europe, Australia and Asia attend her classes to learn how she captures her subjects in a classic realistic stye reminiscent of the European masters. Johnnie continues teaching art classes at her studio in La Porte, Texas.

Evolution of the Mask Series – Part 1

“In the beginning was the Word… ” – I disagree. In the beginning was the Thought, and the Thought was with Art, and the Thought was Art.

The word is just another imperfect medium for thought. It is up to us to decide, which medium to use to interpret, materialize and communicate the thought. As a painter – my choice is obvious and mostly I refrain from too many words. But it’s a multimedia world and in response to a few requests I will employ a number of words to shed some light on the Great Unmasking series and its evolution, which looks interesting when I align the masks in a chronological order.

In the beginning was the thought embedded in the initial painting of this series – an auto portrait that I did in 2015 and the only painting in this series, where no one has argued that it was not I. What I see is a man resting his heavy head on his hand in contemplation. Here, the body is the mask for thought. An auto portrait, as the body itself, is a treasure-house for privacy and I would feel much more naked if I put up all my thought on public display then if I would find myself without any clothes on in front of a crowd. This is what this auto portrait means to me at the moment. However, I am not going to lie: this connection came in hindsight – three years after painting it. There was no genius idea that I sought to realize on canvas. It is the viewer-I that gets a certain understanding for an artwork that the painter-I has created. The painter-I and the viewer-I are two very different models for being.

The series didn’t feel complete, there was no beginning until I’ve considered the Autoportrait as a part of the series and its initial seed. Paradoxically, the most recent addition is this painting that predates all others in this line.

To share with you a little secret – that was the first time ever that I’ve painted using a palette knife. It felt good – so nice, quick, clean, crisp and looked surprisingly fine to me.

Little that I knew – it just was not enough. Too simple was the thought of portraying a physical shell, a figure that anyone can see as it is. So as it happens quite often – the circumstances lent a helping hand. To be honest, I just got into an argument with my wife and I was just angry as hell! Why? It was probably something ridiculously trivial and I would not have been able to recall it in a day, but…

Dammit, I painted anger! This really felt like grabbing a monumental emotion with my bare hands like it was a heavy boulder, picking it up and pushing it way above my head, perceiving the pressure in every vertebra of my spine, my knees and feet, my shoulders, elbows, palms to launch it with all the might I could imagine onto the canvas! Quick, violent, intuitive, simple yet powerful smears of vivid colors gave birth to the Friday Guy (it was a friday – the name was evident). That must have been an act of self-inflicted art therapy. I painted from within and when I was done it was good and I was good.

Eureka! Here it hit me like a lightning. It was a mask that I took off and realized how much I gained by doing so. The concept for a series of paintings seemed as clear at once as Adriatic waters between Dalmatian isles. The primary goal became to capture another part of self for every day of the week. I wanted to see, what I would come up with. And I still do.

The fact that I can simply do this entertains me greatly, because just a short while ago I would put on a shirt, tie and suit every monday morning and go to work to an office, make the company goals my own and make sure that my teams did just the same. A sort of tunnel vision that structured life into its flow, which is good in many ways, but that was another role to play, another mask to wear. I failed to see the light in the end of that tunnel, instead I held up a burning match at arm’s length to follow it for years. Just for as long I failed to see that there exist as many other ways as one can imagine. That was the mask of Monday Guy I wore.

I bequeath this mask of the routine to hundreds of millions of people who wear it in good faith around the world. They make the world tick as it does and I trust fully and pray that they will continue to do so. Among them are many of my good friends and great acquaintances with whom it is always a pleasure to reflect on such ideas over many pints of some good craft brew. Some love their roles, some write their own scripts and the Monday Guy mask may not apply any more, some loathe – whatever… Work hard, play hard – is the philosophy of quite a few hard-working ladies and gents I know.

One thing that quite a few of them (and I) may find in common after long conversations and too many drinks is the Sunday Guy – a mask that everyone is surely conscious of, when wearing. As blue as sunday can ever be. That’s for the color, though: blue, black and white. I’ve simplified the form and painted with a minimum of bold strokes to emanate an ancient timelessness and mystery like a giant Moai statue on the Easter Island – another association that appeared in retrospective. Yet, I am not made of stone and the feeling that all of this, good and bad, is here to stay sooner or later fades away like clouds in the skies.

The sky, no doubt, fascinates me. Clouds are wonderful and clear skies are amazing any time of year. I love looking up and seeing what’s going on in the world around me. Beautiful, light-hearted, light-blue – “the world is yours”, they tell me. And so it is – I won’t contest. That sounds quite romantic. And beauty is. As is the sky whenever and wherever. Yet, when you are in it – dozens of thousands of feet above the ground in an airplane (I envy pilots), you always find yourself surrounded by this beauty – so peaceful and calm above the clouds. Sometimes – in between of layers of clouds, where there is the sky – so clear and divine ahead, those clouds that seem like whipped cream below and above – mesmerizing… dreamy… divine…

There was a feeling of balance in everything as I was on a plane to Amsterdam. Right between such clouds it looked like there were two horizons. It was a Tuesday. But only when we were back in Kiev, have I thought about this. Maybe I am slow to recognize many a thing, but that’s just how it is. Making a sense of images and feelings requires time – sometimes years. Yet, hopefully, it is fruitful. This time around it was a bit faster as for a few weeks straight (only on Tuesdays, for some reason) this picture just reappeared in my mind. It was this idea of balance that didn’t let me go.

I kept imagining those two even, straight, well-defined layers separated by a few hundred yards of blue skyline – as if they were painted. Next Tuesday this transformed into the idea of a new look at balance – a new Yin & Yang of a personal kind. The Tuesday Guy was born. So solid, yet transparent. So dark, yet letting through all the brightness. So new, yet looking like he’s aging thanks to the craquelure. A character of his own.

The character that always exists and does not shut his eyes. The character that loves, what he does. The character that does not care, whether his embodiment is I or anyone else. The character that has the unquenchable thirst to create. The character that forgets about anything besides his… I forgot what…

Well, Tuesday past and it’s saturday night. I am on the balcony on my floor opposite from my flat. I see those street lights and cars from my fifth floor. Across the drive way is a nine story building that is a shabby dorm of some institution. Below me are a bunch of cars under the street lights. As lights keep going out in the dorm I feel that I am the only one awake and working. I don’t mind. I paint late into the night. It is a pleasure.

That is now – the moment that I always enjoy. This ever faster fleeting present – is life. The present is what fascinates me more and more throughout my life and my work. So I paint. I paint through good and bad, through wise and foolish, through all the colours. In the present I try to grasp the past and the future. But it seems that in the present moment itself there is no room for anything. It is a humble, elusive moment – always at a crossroads.

With the Wednesday Guy there is no present in the picture. There is a past and a potential future. The two I’s are not I, which is somewhere in the void between them. Now, I believe that there are other universes, where time is like “left” and “right” and is to be navigated. And I can imagine this and put a hint of it in oil paint on canvas depicting something that is no more and another state of the same thing that has yet to occur. In a way this is the best and simplest definition of the present as neither the past, nor the future.

No surprise that there are sayings in different languages referring to people not living in the present or living in the past. I catch myself sometimes living in the future, sometimes – in the past. Both feels like imagination to me. And the present becomes the past just way too quick to even pinpoint. It’s like star-gazing and seeing light that at present is millions of years old. Even our beloved sun is 8 minutes and 20 seconds away from now.

The Thursday Guy stands with the back to the viewer and faces the sun. He has no face, or rather, he has potentially them all. That is the Saint Painter that is either a genius or a fool that risks getting his retina burned to either discover something new with this action or to just go blind. Isaac Newton did such an experiment to provoke after-images, but his vision recovered, luckily. Yet, an after-image of the sun literally burned into one’s eyes is an extension of the 8 minutes and 20 seconds – an attempt to see whatever one hasn’t yet seen whatever can not be seen in normal circumstances – neither the past, nor the present, nor the future. A quest for the timeless idea, for discovery, for the pleasure of new thought and alternative perspective, but that may go along with certain sacrifices in the process, where the cost my be just a bit too high like the realization of one’s own total blindness.

I am not a proponent of martyrdom, like staring at the sun until complete blindness for some greater cause or burning oneself to death to spark the Arab Spring. Not at all. But there are sacrifices that accompany every decision and they sometimes add up in curious ways, which touches in a way on an underlying theme for several paintings after the initial “week days” in the Unmasking series.

In four square one by one meter paintings I introduce a new shape for masks that is visually more abstract and start sacrificing physical resemblance to the human face. I would love to know, what sparked this transformation and these forms, but I can not pinpoint anything. Also putting these four in a certain order is challenging because they got intertwined as I worked on all of them simultaneously.

Openness is the first thing that comes to my mind, when I look at the “Eclectic” mask, because it lies deep within its roots.

It is a concept that I wanted to embrace, when I was 16 years old as my parents and I moved from Berlin to Chicago in 1999. I remember clearly how I wanted to embrace whatever would lay ahead in that new chapter of my life to not fight against the upcoming circumstances. It seemed important to me at that point, because it took me a long time to adapt to Berlin after moving there from Kiev four or five years before and I wanted the move to the USA to be easier. I envisioned at that moment that being like a sponge to absorb whatever a completely new environment would offer, provided an easy way for assimilation, for accepting and for being accepted. And soon it was evident that I was right. However, there was much more to it…

Being like water in the city – taking on the shapes of its urban surrounding and becoming an indefinite, translucent blend-in, an enchanted mimicry of the multitude of colors around it – is a transformative experience. One that opens up or creates a new self through losing own characteristics, adapting and transforming into a self of other’s colors. That may sound and look great, but it may come at the cost of a great sacrifice – what happens with the initial self? Is the intrinsic self actually revealed in this process or does it get hidden under layers of compromises? And sooner or later it is great to be able to take off the “Eclectic” mask.

But, what do I do? I take one off and put one on.

This mask of Gold is easy and fine to hide behind. It is great as all hues become monochrome and what is left are simply riches on your mind – they are your lover and a friend – the one, who does not let you go as long as you just care. But in the moment of accepting this mask as my own I felt the sacrifice was made. Just like the Yellow mask is ripe to kill to get desire satisfied. The sacrifice is made. It is Ophelia’s last breath in light of fading love. It is the one that’s ready for last true loving touch even no matter if you hate. It is the final kiss goodbye that turns to last of thoughts. I’d paint it black for death, but it is not. As any black there is – just simply shines as my mind fades in darkness deeper than total lack of light. One that is there because it’s not, but my eye simply would just know. It is the perfect state of thing, which means – the end is here – the zero point at which in no time a new beginning just occurs, because it is the state of things as perfection lasts just this single moment that a human mind can’t really grasp – it is always now. Hence all reflection that occurs worldwide is art in all its forms. As thought bears all its might at any single point in time: The timeless time it is – the Now.

We do not have the time. The time has us. It is the sacrifice that rests within us all. The common denominator for all that we may ever know is constant transformation.

Now it just seems to me that the best thing for the art of life that I can do is spend more time with my kids and share with them each single choice’s sacrifice I made to make them truly rich at early age with all experience I have to never witness how it fades, but see it grow and blossom bright. If they will learn from the mistakes I’ve made, of which there are a lot, then it will be an early step towards wisdom – a concept that seems inapplicable to me. Instead, the dream of endless life is much more real as long as I am even just a single drop, a salty tear in the vast ocean of thought.

That multiplicity of roles and meanings, views and facets, identities that form even a single being in its own mind and ready to display is just immense. In “Silhouettes,” which derives its general outlines from the “Sunday Guy,” all shapes and lines are made of faces viewed in profile. Hundreds of silhouettes combine to form the lines. Moreover all silhouettes have two sides to them – a bright and a darker one, which are also made up of more layers that echo each small face. If I moved closer I would see each single part like every screw and bolt, each cogwheel of the whole machine. But at a moment, when I don’t want to ask way too many questions of myself, I take ten steps back and regard the simpler picture. With this in mind, I cease to be surprised about this painting causing distress to some people who found their desks too close to it, when it was a part of my solo exhibition in the open office space of the House of Decentralisation in Kiev. The emotions caused by this painting were on the opposite extremes of the spectrum…

End of Part 1

How To Paint Your Car

Masking & Preparation

To begin this venture we need to clean the metal on the car. After we clean the metal, make sure it’s dry before we begin to mask the car, also do a last minute check to be sure it’s free of all dirt grease and other contaminants.

Now it’s time to mask the car, and be sure to mask all that you don’t want painted leaving no masking hanging of the car, that would get in the way of a nice paint job. The main idea of the whole thing is to produce the best quality paint possible with the given surroundings, it is preferred that you have a paint booth, but if not, make sure that the area that you use to perform the work is ultra clean and dust free.

After the car has been masked it’s time to get ready to spray the primer, once again make sure that you have cleaned your surroundings, it’s best to have some water on the floor to keep the dust down, once you are confident that the area is clean then you can begin checking the spray guns to be sure that they are clean. This is a very important step especially if they’re not your guns, dirty guns will make an ugly paint job there for wasting all of your time.

Now that you have determined that the paint guns are clean, make sure that your respirator is in good working order. Now be sure that you have all the products that you need to perform the primer job on the car. You will need primer, reducer and catalyst, you will also need strainers, stir sticks and a measuring device.

It’s best not to have to leave the paint booth during the time that your priming the car. Reducer comes in different temperatures and you need to know what temp is best for your working conditions.

The temps are as follows, their is a high temp that is designed to dry slower when it’s hot in the area where your working, high temp is good for 80 degrees and up, theirs also a mid temp, this probably the most popular temp used this is best used from 55 to 80 degrees and is designed to dry faster to make up for the colder temp, due to the fact primer will run easier in the cold weather. Now we have low temp reducer this will dry extremely slow therefore for giving the primer a better chance to run. I tell you all this in an effort to help you better understand the products that you are working with, the more you know the better armed you are for problems when they happen.

Now it’s time to enter the paint booth, and as you do pay attention to the booth filters and be sure that they sure clean also. Now get your can of primer and read the instructions on the side, usually the mix is 4:1 or 4 parts primer to one part reducer and a cap or two of catalyst and for the best results follow these instructions. After you spray the first coat of primer, you will need to wait 15 to 20 minute before you can spray the next and so on, the way I like to do this is to give the body work areas a coat or two first to build them up. The whole reason we use primer is is to give the paint a smooth surface to stick to and give the metal some protection from the elements, it’s usually a good idea to get 4 or 5 good coats on the car.

If you are really serious about the way that you want it to look the you might want to take the primer one step farther and use an etching primer before you spray the urethane or epoxy primer, an etching primer will give the top coat just a little more to stick to. Etching primer has no building qualities there for it’s not used for smoothing out waves in your work, but it will make the primer stick allot better.

I do suggest that you always use a urethane primer,and not lacquer type,as lacquer can and will shrink urethane or epoxy is recommended for best results. Epoxy is a very hard primer to sand but it’s extremely tough, and urethane is I think probably your best choice,because it’s high building and easy sanding, their are a lot of brands to choose from, I use DuPont euro myself but it’s all up to you to choose that.

Now that your card is primed, it’s time to remove the masking, and I like to do this while it’s still a little wet for the sake of ease, just be very careful about how you do it, you don’t want to screw up all that nice work, so just take it slow and easy while pulling the masking off your car.

(Sanding)

Well now the hard part is here, before you start to sand the car you’ll want to be sure that it’s been guide coated, this will make it easier for you to get an ultra smooth finish. Heres where we weed the boys form the men, if your trying to do a show finish on the car that your painting, you will want to sand it by hand with water running on it all the time.

This is the hard part,and you will have lazy people that will want to use a machine to do this, this is just a word to the wise, you have allot better control over a hand block. The best way to produce this type of high quality work is to have the best control over it that you can, offten a machine will go through your primer. If your trying to produce show quality work this would mean priming that area again I.E. more time spent, this is time that could be spent better doing other things.

Now I will explain a bit about what a guide coat is, this is it in a nut-shell. The guide coat is the step right after the car has been primed, you should do this before you pull the masking, what this in tails is misting a light coat of black paint over the primer so that you can see the low spots in your work, and no matter how good you are, you will have low spots. The idea behind this is to sand all the guide coat off with out going through to the metal on your car.

Now it’s time to start the actual sanding of the car, you need to pay close attention to detail on this part of the paint job, the better you sand it, the better it will look. I usually start with 320 grit wet paper on a medium hard block, this grit is good for getting the guide coat smoothed out, their will most likely be some small low spots that will require either spot filler or more primer. This is one of those areas where you need to pay a little attention to detail, here you will need to look at the depth of the low spot and think about it, how low is it will primer alone fill it, or will it take spot filler and then primer.

Now that you’ve finished that part it’s time to move on to the next grit of paper, I usually move to 400 grit on a medium- hard sanding block from here, you don’t want to move up to far because it can leave scratches form the previous grit of paper, so a word to the wise, don’t get in a hurry and move up to far a once this will leave seeable scratches in your work. After you’ve sanded the whole car with the 400 grit wet paper then inspect it for bare metal and guide coat still there.

The whole idea with sanding is to make the primer look the way that you want the paint to look, I sand my primer until it has a smooth shiny finish on it, as if it were the paint on the car.

You need to have a vision of how you want it to look, the one thing that you need to know is, the better you want it to look, the more you will pay for materials. Just a word of caution cheap paint materials are just exactly that cheap!!!!! and don’t use them if you want a nice paint job.

You might save some money but you will not save the agony of a crappy looking paint job. Think about this before you go and buy cheap primers and paints, do I love my car or is it just some turd to push me to work and the old ladies and back, if you love your car then don’t put cheap crap on it.

Now that I’m through with my little lecture on low quality products, it’s time to move on to the next sanding step. From 400 grit I usually move up to 600 grit wet paper, this is where I usually stop unless requested to go one more step, this is really as far as you need to go with the sanding. After you finish with the 600 grit do one final inspection of the work before cleaning it.

Well now it’s time to clean the car, for this just use soap and water, just like washing a car normally. You should blow it dry though, this being the main difference between this and a regular wash job, be sure to blow all the water out of the little cracks in the car, like the cowl area, under the hood, between the doors and in the trunk lid. Believe me this will blow water on your paint during the actual painting of the car, so be very through about this step.

If you miss some and it happens to get in your paint during the spraying process it will bubble the paint, the paint will look horrible so be sure to get all of the water out of the car first.

Now it’s to mask for the actual paint, for this refer back to the top of this page. Masking right is an art and you better take this part very serious if you want a good job.

Now that you’ve masked your car it’s time to put it in the paint booth, hopefully this is a temperature controlled booth, in any case when you roll that car in the booth all you should have to do is clean and spray, again before you put your car in the booth make sure that it’s ultra clean in there and ready to go.

Now make sure that you have everything you need in there to paint the car I.E. paint, reducer, catalyst, stir sticks, strainers and stir sticks and a measuring stick. Once again check your respirator and be sure that it’s working properly, tie your hair back and if you have a beard cover your face.

Follow all instructions on the back of the paint can to the letter or it could cause problems with the out come of your paint.

Now that you have the car in the booth, be sure to double check the masking on it, what you are looking for here is perfection and nothing less.

This means everything that if you don’t want it painted it must be masked for sure, their is no room for error here. Now you need to take a look at the supplies that you have to do the job with, and inventory them to be sure that you have everything you need to complete the job, the last thing you need is to find that you don’t have something right in the middle of painting the car. Here’s a list of what you will need for the job.

Supply List

1) Paint

2) sealer

3) reducer

4) Catalyst

5) Tack Cloths, preferably designed for clear coat

6) Measuring Cups

7) Stir Sticks

8) Measuring Stick

9) Strainers

10) Respirator in working order

Now I will give you a few things to think about, if your painting with metallic paints then you must pay allot attention to the settings on your paint gun. Metallic paints will tend to get lighter if the pressure goes up and darker if it goes down, your fluid flow and fan on your gun will also effect this.

Now I will give you a basic mixing chart, most paints will follow this chart.

Instructions

1) get your paint ready to pour.

2) make sure that your mixing cup is clean.

3) Get your strainer and sticks.

4) Put a strainer in the top of the measuring cup.

5) Now pay close attention to the level of paint in the cup.

Paint Mixing Table. Always be sure to read and follow the paint manufactures mixing guide lines. These mixing ratios are just a basic idea of what to do, things will change with different manufactures.

Recommended Air Pressure At Gun Head. Paint Mix Ratios. Paint Product.
25-40 PSI Mix 4:1:1 Base Coat

25-40 PSI Mix 4:1:1 Sealer

25-40 PSI Mix 4:1:1 Clear Coat

25-40 PSI Mix 2:1:1 Primer Coat

When using a paint gun, you try to achieve a certain spray pattern without any heavy or light areas, in the pattern chart above you would try to achieve pattern (A).

Now a lesson on gun angle. Their are only two angles you should ever need to use when holding a spray gun, and they are 45 and 90 degrees angles to the surface of the car that you are spraying, these angles will give you the best outcome possible, and also you should try to keep the spray gun at about 6 to 8 inches from your work. If you get much closer you will more then likely cause a run in the paint and, much more distance and you will get a dry look to your paint job, you also need to get a feel for the speed that you need to move the gun according to the air pressure and fluid flow of the gun.